SEGMD=STATIC, RPHEN=DISABLED, BLANKEN=DISABLED, BIASMD=ONE_THIRD
Segment Control
| BIASMD | Hardware Bias Mode. 0 (ONE_THIRD): Select 1/3 bias. Use for three-mux segment mode and four-mux segment mode. 1 (ONE_HALF): Select 1/2 bias. Use for two-mux segment mode. |
| SEGMD | Segment Mode. 0 (STATIC): Select static segment mode with one common COMn.0 used. 1 (2_MUX): Select two-mux segment mode with two commons (COMn.0 and COMn.1) used. 2 (3_MUX): Select three-mux segment mode with three commons (COMn.0, COMn.1, COMn.2) used. 3 (4_MUX): Select four-mux segment mode with four commons (COMn.0, COMn.1, COMn.2 and COMn.3) used. |
| BLANKEN | Segment Blank Enable. 0 (DISABLED): Operate segments normally. 1 (ENABLED): Blank the LCD by disabling all LCD segment and common pins. |
| RPHEN | Reset Phase Enable. 0 (DISABLED): Hardware switches the LCD segment and common pin controls directly from one state to another. 1 (ENABLED): Hardware switches the LCD segment and common pin controls to intermediate states for several RTC clock cycles before switching to the next state. |
| RPHMD | Reset Phase Mode. |